Fujitsu Primergy RX600 S2 User Manual page 186

Chapter 7 Installing Internal Options
10
Install the CPU.
Align the triangle on the CPU socket (pin no. 1 marking) with the triangle on the CPU. Insert the
pins into the socket, and then return the socket lever to the original position.
Pin no.1 marking
11
Install the heat sink.
Attach the heat sink to the installed CPU and fasten it with the four screws.
Carefully tighten the screws in diagonal order.
186
• When installing the CPU in the socket, be careful not to bend the
CPU pins.
Heat sink
• When installing the heat sink, keep the heat sink from the
condenser on the base board.
CPU