Fujitsu Primergy RX600 S2 User Manual page 246

Chapter 8 Configuring Hardware and Utilities
Item
USB
USB Controller Enable
USB 2.0 Controller
Serial Ports
COM1 Enable
Address
IRQ
PCI
Enable Slot 1 ROM
Enable Slot 2 ROM
Enable Slot 3 ROM
Enable Slot 4 ROM
Enable Slot 5 ROM
Enable Slot 6 ROM
Enable Slot 7 ROM
Enable FC Card ROM
Boot to ROMB Hard Drive
246
table: Items on the Devices Menu
Settings
Configuration for USB controller
Set to enable the USB controller.
Enabled（unchangeable）
Disabled（unchangeable） Set whether or not to enable the USB 2.0
controller.
Configuration for serial ports
Set whether or not to enable the serial ports
• Enabled（initial value）
• Disabled (COM1).
Set the base I/Q address of serial port (COM1).
• 3F8（initial value）
• 2F8
• 3E8
• 2E8
• 3 Set the IRQ of serial port (COM1).
• 4（initial value）
Configuration for PCI slots
• Enabled Set whether or not to enable the expansion
ROM with each PCI slot.
• Disabled（initial
value）
Set the order of option ROM scanning.
• Auto（initial value）
• First
• Last
Description