Fujitsu Primergy RX600 S2 User Manual page 185

8
Remove the dummy heat sink.
Turn the four fastened screws in the direction of the arrow and remove them.
Dummy Heat sink
9
Release the lever on the CPU socket.
Pull up to open the socket lever fully. A CPU cannot be installed unless the socket lever is fully
open.
Socket lever
• The socket lever opens by about 135 degrees.
Be sure to open the socket lever fully to release it. If the socket
lever is not fully open during CPU installation, the CPU may be
damaged.
PRIMERGY RX600 S2 User's Guide
1
2
3
4
5
6
7
8
9
185