Fujitsu Primergy RX600 S2 User Manual page 238

Chapter 8 Configuring Hardware and Utilities
3
The BIOS Setup Utility is started up and the BIOS Setup Utility screen appears.
Main Processor
Set General System Parameters
Bios VersionSHW40.86B.P.04.02.0012
System Data
System Time
Quiet Boot Enable
POST Error Pause
●
Key Operations in the BIOS Setup Utility
The roles of the keys used for setting the BIOS Setup Utility are as follows:
table: List of Key Operations on the BIOS Setup Utility Window
Key
[Esc]
[↑][↓]
[←][→]
[-][+]
[Enter]
[F9]
[F10]
■ How to Exit the BIOS Setup Utility
1
Use the [ ← ] [ → ] keys to display the [Save, Restore & Exit] menu window, and
select the exit mode. Or press the [F10] key instead.
To save configuration changes before exiting:
Move the cursor to [Save Changes & Exit] and press the [Enter] key.
The message "Save configuration changes and exit now?" is displayed.
To exit without saving configuration changes:
Move the cursor to [Discard Changes & Exit] and press the [Enter] key.
When the setting are changed, the "Configuration has not been saved! Save before exiting?"
message is displayed.
2
Use the [←] [→] keys to move the cursor to [Yes] or [No], and press the [Enter]
key.
238
BIOS SETUP UTILITY
Memory Devices
[MM/DD/YYYY]
[HH/MM/SS]
<Disabled>
<Enabled>
Ends this utility. In the case of a submenu, it returns to the previous menu.
Scrolls through the menu option list.
Switches between menus.
Changes the value of an item.
Activates the selected item or displays the sub menu of items with the mark. In
items in which is displayed the sub menu appears.
Sets each item to its initial (default) value.
Saves the setting values and ends the operation.
Server Security Save, Restore & Exit
Main
Current BIOS Version
Esc = Exit
= Move Highlight
Description