Fujitsu Primergy RX600 S2 User Manual page 189

Replacing the Defective CPU
Replace the defective CPU with a new one according to "7.3.3 How to Install CPUs" ( pg.183).
After replacing the CPU, start the BIOS Setup Utility and change the [Processor Retest] setting on the
[Processor] menu from [Disabled] to [Enabled]. To use the new CPU, set the item to [Enabled] for
releasing the failed CPU status setting at the next startup.
The value of [Processor Retest] is automatically reset to [Disabled] at the server startup. For details on
the BIOS Setup Utility, refer to "8.3 BIOS Setup Utility" ( pg.237).
PRIMERGY RX600 S2 User's Guide
1
2
3
4
5
6
7
8
9
189