Fujitsu PRIMERGY RX600 S3 Start Manual

n PRIMERGY RX600 S3 (SAS model) Manuals
Manuals for this server can be accessed from the section below of the PRIMERGY Document & Tool CD.
[CD-ROM Drive] :\MANUAL\INDEX.PDF
Manuals can be displayed using Acrobat
1
Checking the items
supplied
Use the "Contents List" to check the contents in
the package.
If any items are missing, contact an office listed
in the "Contact Information".
3

Installing internal options

If internal options have been purchased separately, install them before installing the Operating System.
In the following case, it is not required to install the internal options.
- Custom Made Service
n Before installing internal options
When installing internal options, perform operations after
reading the following manuals.
"Chapter 7 Installing Internal Options"
Manuals supplied with the optional
devices.
Install the USB optional devices after OS installation, oth-
erwise the installation may terminate abnormally.
RX600 S3 (SAS model)
Reader or Adobe Reader
® ® ®
1
. If using Acrobat Reader , use version 5.0 or later.
® ® ®
2
Reading and understand-
ing "Safety Precautions"
Before using this server, be sure to read and un-
derstand the attached "Safety Precautions".
Also check it when connecting and installing internal op-
tions to set up this server.
n Available Internal options and
installation locations
���������
�������������
���������
��������������
After installing internal options, check that the order and
place of installation are correct and cables are correctly
attached.
B7FH-4851-01EN-00
��������������
�������������
����������
����
���