Fujitsu Primergy RX600 S2 User Manual page 151

■ Creating a DOS Floppy Disk
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1
Click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2
Click [DOS Diskette].
Insert the prepared floppy disk by following the message.
3
Perform the subsequent operations according to the messages on the window.
The floppy disk will be formatted automatically and file copying will start.
The DOS floppy disk will be created automatically.
When a message appears indicating that the disk is created, click [OK] and eject the disk.
PRIMERGY RX600 S2 User's Guide
5
151