Fujitsu Primergy RX600 S2 User Manual page 211

5
When installing a card in Slot 1 through 5, remove the dummy card from the
PCI card holder and install the expansion card on the PCI card holder.
1. Lift the stopper latches or slightly bend the PCI card holder outward to remove the
dummy card.
Lift stopper latches
Dummy card
2. Slide to remove the stoppers.
Stoppers
3. Install the expansion card on the PCI card holder and fasten it with stoppers.
Use stoppers in three locations depending on the card.
PCI card holder
Stoppers do not
slide upward.
PRIMERGY RX600 S2 User's Guide
1
2
3
4
5
6
7
8
9
211