System Requirements For Remote Resource/Pxe Servers - Fujitsu Primergy RX600 S2 User Manual

Chapter 3 OS Installation Using ServerStart
3.4.2 System Requirements for Remote Resource/PXE
Servers
Because remote installation is performed via a network, the environment must have at least one
Windows server and a local area network.
In addition, the following environment is required.
■ Remote Resource/PXE Server Requirements
OS Windows 2000 Server SP2 to 4
Memory 256MB or more
Operating • DHCP server function (required on the same
environment
• File sharing function (required)
Notes on the PXE server
Check that no other PXE server exists on the same LAN.
Servers installed with software with the PXE function such as SystemcastWizard/SystemcastWizard
Professional, Quick Recovery Manager, or the Microsoft RIS function cannot be used as a PXE server.
■ Checking Server Free Space
Decide a server to use as a remote resource server / PXE server and check it for enough free space for
storing resources.
●
Checking the Number of Servers
• When you have only one server, use it as the remote resource server, PXE server, and DHCP service
server. Check it for the required amount of free space.
• When you have multiple servers
• Check if a server performing the DHCP service exists. If not, decide a server for the DHCP
service.
• When there are multiple resources, they can be divided and stored in multiple remote resource
servers.
90
table: System Requirements for Remote Resource/PXE Servers
PXE server
network)
Remote resource server
Windows Server 2003
Windows 2000 Server
Windows NT Server 4.0
256MB or more
• File sharing function (required)