Server (Rear View) - Fujitsu Primergy RX600 S2 User Manual

Chapter 1 Overview
o System Reset button (
Press to reset and restart the system.
p Fan modules
This server has four system fans by default, and a redundant function is effective.
q Fan module failure LED
Indicates fan modules status. This LED glimmers amber when the server is turned on, and is lit
intense amber at the time of fan modules failure
r 3.5-inch storage bay
Contains an internal hard disk.
s Hard disk access LED (
This LED is lit when data is being written to or read from the hard disk. When the hard disk is not
accessed, this is not lit.
t Hard disk failure LED (
During an array system configuration, this LED is lit amber when an error is detected in the
internal hard disk unit. It is lit or blinks depending on the hard disk status as follows.
Off
Amber, On
Amber, Blinking

1.3.2 Server (Rear View)

a
b
a Serial port connector (
Connects cables of peripheral equipment conforming to the RS-232C standard such as modems.
24
)
Do not restart the system when the Hard disk access LED is blinking.
Data in the hard disk may be damaged.
)
)
table: Meaning of the Hard Disk Failure LED
LED
In normal mode or hot spare mode
Error detected in the hard disk (in an array configuration)
Rebuilding or faulty hard disk replacement in progress
c d
g
f
)
.
Description
e
g
i h
f