Sensor (Booklet End Guide Hp) Removal; Sensor (Booklet Front Tamper Hp) Removal - Lexmark X95x Series Service Manual

7558-xxx

Sensor (booklet end guide HP) removal

Remove the booklet unit assembly. See
1.
2. Remove the booklet unit assembly left cover. See
page 4-337.
Disconnect the connector from the sensor (booklet end guide HP) (A).
3.
Release the hooks securing the sensor (booklet end guide HP) (A) from the booklet unit.
4.
5. Remove sensor (booklet end guide HP) (A).

Sensor (booklet front tamper HP) removal

Remove the booklet unit assembly. See
1.
Remove the booklet unit assembly left cover. See
2.
page 4-337.
3. Disconnect the connector from the booklet front tamper sensor.
Remove the screw securing the sensor (booklet front tamper HP) bracket from the booklet unit assembly.
4.
Service Manual
4-386
"Booklet unit chassis removal" on page
"Booklet unit assembly left cover removal" on
Left
Connector
A
"Booklet unit chassis removal" on page
"Booklet unit assembly left cover removal" on
4-338.
4-338.
Previous
Next
Go Back