Status Indicator; Rf 3227E Rf; General; Address Setting - Bosch ICP-AMAX4-P1 Installation Manual

AMAX panel 4000 / AMAX panel 4000
EN
Figure 5.9: GSM Mode in Support of PSTN (Contact ID)
5.6.4

Status Indicator

The AMAX panel tests the communication normally with the module. In case of communication
failure, a fault report including the module address is sent.
LED Condition
On
Flash
Off
Table 5.11: DX4020-G System Status Indicator
For more information on indicators, configuration and other topics related to ITS-DX4020-G,
see Installation and Operation Guide.
5.7

RF 3227E RF

5.7.1

General

The RF3227E RF receiver allows the use of wireless devices using the AMAX panel 3000 /
4000.
Installation
Whenever possible, the receiver should be mounted in a central location with regard to all
wireless sensors. The receiver should be mounted vertically, with at least 25 cm clearance
above it for the antennas. Avoid mounting the receiver in areas with significant metal or
electrical wiring such as furnace, or utility rooms. If this is unavoidable, mount the receiver
with the antennas extending above any metal surface. Avoid mounting the receiver in areas
where it may be exposed to moisture. Reception distances are generally improved with higher
mounting locations and with no metal objects near the antennas.
5.7.2

Address Setting

Set receiver address to #1. The AMAX panel supports only receiver 1, not receiver 2.
Bosch Sicherheitssysteme GmbH
1RING
1RING
TIP
TIP
TIP
TH
RH
RING
Installation Guide
Optional Modules and Peripheral Devices | en
Denotation
Normal Condition
Trouble Condition
Power Failure
19
DX4020G
2014.4 | 01 | F.01U.267.112