Bosch ICP-AMAX4-P1 Installation Manual page 98

98 en | Address Programming
Siren / PO 1+2 Supervision
Address 0140
0 = disabled, 1 = PO1 enabled, 2 = PO2 enabled, 3 =
PO1+2 enabled
Keypad 2 Button Alarm
Address 0141
0 = disabled, 1 = enabled
Phone Line Monitor
Address 0142
0 = disabled, 1 = enabled
Beep For Warning Devices
Address 0143
0 = disabled, 1 = enabled
Ring Count
Address 0144
1 - 13 = Number of rings until the AMAX panel responds
14 = Call the AMAX panel and allow the phone to ring not
more than twice and hang up. Wait a minimum of 8 sec
and call the AMAX panel again. The AMAX panel answers
on the first ring.
15 = Call the AMAX panel and allow the phone to ring no
more than four times and then hang up. If you call again
within 45 sec, the AMAX panel answers the call on the
first ring.
0 = Panel does not answer
Remote Programming
Address 0145
0 = disabled, 1 = enabled
Callback Telephone Number
Address 0146 - 0161
See Telephone Programming Parameters
2014.4 | 01 | F.01U.267.112 Installation Guide
AMAX panel 4000 / AMAX panel 4000
Address Default
0140 0
VDS-A EN=3
Address Default
0141 0
Address Default
0142 0
VDS-A EN=1
Address Default
0143 1
Address Default
0144 14
Address Default
0145 1
VDS-A=0
Address Default
0146 - 0161 15
Bosch Sicherheitssysteme GmbH
EN