Bosch ICP-AMAX4-P1 Installation Manual page 68

Amax panel 4000; amax panel 4000 en
Hide thumbs Also See for ICP-AMAX4-P1:
Table of Contents

Advertisement

68
en | Settings
9 - Entry/Exit Delay Warning
Entry Delay Warning
This output operates during entry time.
The output is reset:
1.
2.
3.
Exit Delay Warning
This output operates during exit time when the AMAX panel is armed.
The output is reset:
1.
2.
3.
If this duration is programmed as 000, the output will continue till the delay warning duration
is up.
10 - Telephone Line Fault
This output operates when a telephone line fault occurs.
The output is reset:
1.
2.
If this duration is programmed as 000, the output will continue till the telephone line is
restored and fault is reset.
11 - AC Power Supply Fault
This output operates when a AC MAINS fault occurs.
The output is reset:
1.
2.
If this duration is programmed as 000, the output will continue till the AC MAINS power is
restored and fault is reset.
12 - Low Battery
This output operates when a low battery fault occurs.
The dynamic battery test is performed every 4 hours after the system is powered up and every
time the system is armed.
The output is reset:
1.
2.
If this duration is programmed as 000, the output will continue till battery is restored and fault
is reset.
13 - Tamper
This output operates when a tamper condition occurs.
The output is reset:
The output is reset when the output programmed duration is up.
lf this duration is programmed as 000, the output will continue till the tamper condition is
restored and tamper is reset.
2014.4 | 01 | F.01U.267.112
When the system disarmed.
When Entry Time expires.
When the output programmed duration is up.
When the system is disarmed.
When Exit Time expires.
When the output programmed duration is up.
When the telephone line is restored and fault is reset.
When the output programmed duration is up.
When the AC power supply is restored and fault is reset.
When the output programmed duration is up.
Only after receiving a dynamic battery test report that the backup battery voltage is
normal and fault is reset.
When the output programmed duration is up.
Installation Guide
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Icp-amax4-p2-enIcp-amax-p3-enAmax 4000Amax 4000en

Table of Contents