Bosch ICP-AMAX4-P1 Installation Manual page 87

AMAX panel 4000 / AMAX panel 4000
EN
Install USB driver. The device driver is located in A-Link plus application path (example: C\
\program files (x86)\Bosch Security System\A-Link Plus\USB_DRIVER).This installation will
create an additional COM device on the PC. When finished installation, identify the COM-Port
associated to this device.
Select M = menu item file – communication settings.
Figure 8.11: A-Link Plus
Make sure that value for direct link port is the same as the port created by USB driver
installation.
Figure 8.12: Direct link port
Open customer account the AMAX panel. Select index sheet "Link". Select communication
model "Direct Connect".
Click on Button "Connect" in order to connect to the AMAX panel.
Bosch Sicherheitssysteme GmbH Installation Guide
Configuration | en 87
2014.4 | 01 | F.01U.267.112