Bosch ICP-AMAX4-P1 Installation Manual page 109

AMAX panel 4000 / AMAX panel 4000
EN
Notice!
In case of common area, the area 1 will be the common area. When there is only 1 area in the
system, the address 0370 can only be programmed as 1.
Zone Area, Zone Functions, and Module Selection
Zone
no *
1
2
3
4
5
6
7
8
Notice!
Zones may be indicated on keypads with a number that are different from zone number used
for programming and hardware input.
Example:
Task:
In a area 1 system keypad, zone number 17 should be indicated as Zone number 16 (e.g.
visible on 16 zone LED keypad).
Procedure:
After disabling zone 16 * (or another one in range 1 to 16) zone number 17 is indicated on
keypad as number 16.
Notice!
When a zone is assigned to a RF device (3), then the dedicated on-board zone is not available.
* AMAX 4000 supports up to 64 zones, 16 keypads, and 16 areas
AMAX 3000 supports up to 32 zones, 8 keypads, and 8 areas
AMAX 2100 supports up to 8 zones, 4 keypads, and 2 areas
*** AMAX 3000 / 4000
Bosch Sicherheitssysteme GmbH
Area selection Default
address
0678 - 0679 01
0680 - 0682 01
0682 - 0684 01
0684 - 0686 01
0686 - 0688 01
0688 - 0690 01
0690 - 0692 01
0692 - 0694 01
Value range: *
00 = zone not used,
1 - 16 = area 1- 16
Installation Guide
Zone function Default
selection
address
0806 3
0807 1
0808 1
0809 1
0810 1
0811 1
0812 1
0813 1
Value range:0 –15. See
section Zone Functions
Address Programming | en
Module Default
selection
address
0870 0
0871 0
0872 0
0873 0
0874 0
0875 0
0876 0
0877 0
0 = On-board zone
3 = RF device ***
15 = not used
2014.4 | 01 | F.01U.267.112
109