1-1] Slot-Port Property - Did Port-Connection Command (Kx-Tde Series Only) - Panasonic KX-NCP500 Programming Manual

3.51 [1-1] Slot—Port Property - DID Port—Connection Command (KX-TDE series only)
3.51 [1-1] Slot—Port Property - DID Port—
Connection Command (KX-TDE series only)
Commands for the DID ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
3.51 [1-1] Slot—Port Property - DID Port—Connection Command (KX-TDE series only)
Programming Manual References
3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.51 [1-1] Slot—Port Property - DID Port—Connection Command (KX-TDE series only)
Programming Manual References
3.50 [1-1] Slot—Port Property - DID Port (KX-TDE series only)
Feature Guide References
None
426 PC Programming Manual