Panasonic KX-NCP500 Programming Manual page 485

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

Caller ID—Visual Caller ID Display
Specifies the length of time that a Caller ID number, with the Call Waiting tone offered by an analogue line
from the telephone company, is shown on the display. The Caller ID number flashes on the display for five
seconds, followed by a 10-second pause, then flashes again for five seconds.
Value Range
0–250 s
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.1.3.3 Call Waiting
1.8.4.2 Call Waiting Tone
1.18.1 Caller ID
Extension PIN—Lock Counter
Specifies the number of successive incorrect PIN entries allowed before the extension PIN is locked. A locked
extension PIN can not be used until reset from the extension assigned as manager. (Specifying "None" disables
this counter.)
Value Range
None, 1–15
Maintenance Console Location
4.5 [2-3] Timers & Counters
Programming Manual References
None
Feature Guide References
1.9.5 Walking COS
1.9.6 Verification Code Entry
1.28.1 Extension Personal Identification Number (PIN)
External Sensor—Ring Duration
Specifies the length of time that the PBX waits for the called party to answer before cancelling a sensor call.
Value Range
10 ´ n (n=1–15) s
4.5 [2-3] Timers & Counters
PC Programming Manual
485

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde600Kx-ncp1000Kx-tde100Kx-tde200Pure ip-pbx

Table of Contents