Panasonic KX-NCP500 Programming Manual page 116

3.2 [1-1] Slot—Summary
3.29 [1-1] Slot—Card Property - LCO type
3.32 [1-1] Slot—Card Property - BRI type/PRI type
3.37 [1-1] Slot—Card Property - T1 type
3.40 [1-1] Slot—Card Property - E1 type
3.46 [1-1] Slot—Card Property - EM type (KX-TDE series only)
3.49 [1-1] Slot—Card Property - DID type (KX-TDE series only)
3.52 [1-1] Slot—Card Property - IP Gateway (KX-TDE series only)
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
3.58 [1-1] Slot—OPB3 Card Property
Feature Guide References
None
Status
Indicates the card status (reference only)
Note that MPR card status is always displayed as "-".
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Pre-Install: A card has been added to the slot.
Idle: No card is installed in the slot.
Maintenance Console Location
3.2 [1-1] Slot—Summary
Programming Manual References
3.1 [1-1] Slot
Feature Guide References
None
Version
Indicates the LPR version of the installed card (reference only).
For IP-EXT cards, both the LPR version and the VoIP version are displayed. The LPR version is shown on the
left, and the VoIP version on the right, as follows:
(Example) 1.002 / 1.001
Value Range
Version number
Maintenance Console Location
3.2 [1-1] Slot—Summary
116 PC Programming Manual