Panasonic KX-NCP500 Programming Manual page 657

Feature Guide References
None
VM DTMF Status Signal—Confirm
Specifies the DTMF status signal the PBX sends to the VPS when a certain feature (e.g., Message Waiting)
has been successfully set or cancelled on an extension.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Status Signal—Disconnect
Specifies the DTMF status signal the PBX sends to the VPS when the caller hangs up.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
Maintenance Console Location
5.22 [3-8-1] VM(DTMF) Group—System Settings
Programming Manual References
None
Feature Guide References
None
VM DTMF Status Signal—FWD to VM Ringback Tone
Specifies the DTMF status signal the PBX sends to the VPS when the call has been forwarded to the VPS and
the PBX is calling another port of the VPS.
Value Range
Max. 4 digits (consisting of 0–9, *, #, and P [pause])
5.22 [3-8-1] VM(DTMF) Group—System Settings
PC Programming Manual 657