Panasonic KX-NCP500 Programming Manual page 241

Feature Guide References
1.24.1 Voice Mail (VM) Group
DPT Type—VM Port No.
Specifies the VM port number for the port. This setting is only available when DPT Type—Type on this screen
is set to VM (DPT).
Value Range
1–12
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
1.24.1 Voice Mail (VM) Group
DPT Type—Air Sync Group No
Assigns an Air Synchronisation Group number to the CS. This setting is only available when DPT Type—
Type on this screen is set to Normal.
Value Range
None, 1
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
13.6 [11-5] Air Synchronisation
Feature Guide References
None
Headset OFF/ON
Turns on or off the use of a headset with a DPT. This setting is only available when Port Type on this screen
is set to DPT, DPT(S-DPT), S-Hybrid, or S-Hybrid(S-DPT).
Value Range
Headset OFF, Headset ON
3.24 [1-1] Slot—Port Property - Extension Port
PC Programming Manual 241