Panasonic KX-NCP500 Programming Manual page 576

4.18 [2-9] System Options
Private Network—Public Call through Private Network—Minimum Public Caller
ID Digits
Specifies the minimum length of Caller ID required for a call from a private network to be considered as a call
from a public network.
Value Range
0–15
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
None
Feature Guide References
1.18.1 Caller ID
Private Network—TIE Call by Extension Numbering (Activation Key Required)
Enables extensions at two PBXs connected in a network to have the same leading number. For example,
extension 101 is registered at PBX 1, and extension 102 is registered at PBX 2. Only the Extension Number
Method is supported.
If disabled, different leading numbers need to be assigned for extensions at each PBX.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
11.1 [9-1] TIE Table—
Feature Guide References
1.30.1 TIE Line Service
Send CLIP of CO Caller—when call is transferred to CO (CLIP of Held Party)
Enables the transfer of related CLIP information when a party on hold is transferred. When set to "Enable", the
transfer destination will receive the original caller's CLIP information, not the information of the extension that
performed the transfer.
Value Range
Disable, Enable
576 PC Programming Manual
Leading Number