1-1] Slot-Shelf Property - Virtual Ip Gateway - Panasonic KX-NCP500 Programming Manual

3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Common settings for all of the V-IPGW cards installed in the Virtual Shelf can be programmed.
Main
Gatekeeper Available
Specifies whether to use a gatekeeper. This setting can only be changed when all V-IPGW cards are set to
OUS.
Value Range
Disable, Enable
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Guide References
None
Call Signalling Model
Specifies whether to carry out a call control (H.225) process directly between the cards or through a gatekeeper.
Value Range
Direct, GateKeeper
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Guide References
None
Gatekeeper Connection Checking Interval (*60s)
Specifies the time between periodic checks of connection to the gatekeeper.
Value Range
0 (disabled), 1–1440
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
PC Programming Manual 151