Panasonic KX-NCP500 Programming Manual page 165

Feature Guide References
None
Packet Sampling Time for G.729A
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Value Range
10 ms, 20 ms, 30 ms, 40 ms, 50 ms, 60 ms
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
None
Feature Guide References
None
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Value Range
Disable, Enable
Maintenance Console Location
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Programming Manual References
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway—Incoming Call—
Feature Guide References
None
DTMF
Specifies the type of DTMF tone to be sent out.
Value Range
Inband, Outband (RFC2833), Outband (H.245)
3.9 [1-1] Slot—Shelf Property - Virtual IP Gateway
Voice Codec Priority 1st
PC Programming Manual 165