Panasonic KX-NCP500 Programming Manual page 726

6.5 [4-1-4] Wired Extension—Flexible Button
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Guide References
1.21.1.12 ISDN Service Access by Keypad Protocol
Dial (for NDSS)
Specifies the network extension number of the extension to be accessed using Network Direct Station
Selection.
Note that only extension numbers that have been previously registered in 11.4 [9-4] NDSS Key Table can be
specified here.
Value Range
Max. 16 digits (consisting of 0–9, *, #, T [Transfer], [ ] [Secret], P [Pause], and F [Flash])
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Label Name
Specifies the name of each flexible button on the KX-NT366 IP-PT. The name specified here is displayed on
the LCD for each button. A maximum of 48 flexible buttons can be customised for this extension.
Value Range
Max. 12 characters
Maintenance Console Location
6.5 [4-1-4] Wired Extension—Flexible Button
Programming Manual References
None
Feature Guide References
1.31.4 Self Labelling (KX-NT366 only)
726 PC Programming Manual