Panasonic KX-NCP500 Programming Manual page 824

Pure ip-pbx
Hide thumbs Also See for KX-NCP500:
Table of Contents

Advertisement

7.3 [5-3-1] Voice Message—DISA System
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
7.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.28.4 Timed Reminder
Recording Mode
Specifies the sound quality of messages recorded on the ESVM card when using it as an MSG card. Increasing
the recording quality reduces the total length of recording time available on the card.
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the OPB3 card to "OUS", then "INS".
Value Range
Low: About 120 minutes of messages can be recorded per card.
Middle: About 60 minutes of messages can be recorded per card.
High: About 20 minutes of messages can be recorded per card.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Guide References
1.17.7 Built-in Simplified Voice Message (SVM)
824
PC Programming Manual

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tde600Kx-ncp1000Kx-tde100Kx-tde200Pure ip-pbx

Table of Contents