Panasonic KX-NCP500 Programming Manual page 433

Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Programming Manual References
3.56 [1-1] Slot—Card Property - IP Extension—Common Settings (KX-TDE series only)
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Keep Alive Time Out
Specifies the length of time that the PBX will continue to consider an IP-PT to be active even if it receives no
transmissions from that IP-PT. The PBX constantly confirms the status of IP-PTs. If no communications are
received from an IP-PT for the duration specified here, the PBX considers the IP-PT to be unreachable, and
sets the port status to Fault.
During operation, set between 10 s and 60 s. Settings over 60 s, and Disable, are used for debugging purposes,
and IP-PTs cannot be guaranteed to function normally in these circumstances. Do not use debugging settings
unless instructed to do so.
Value Range
Disable, 10–120 s
Maintenance Console Location
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Echo Canceller Ability
Specifies the echo canceller ability time.
Value Range
OFF, 48 ms, 128 ms
Maintenance Console Location
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
3.55 [1-1] Slot—Card Property - IP Extension (KX-TDE series only)
PC Programming Manual 433