Pure IP-PBX KX-NCP500 Model No. KX-NCP1000 Thank you for purchasing a Panasonic Pure IP-PBX. Please read this manual carefully before using this product and save this manual for future use. KX-NCP500/KX-NCP1000: PBMPR Software File Version 1.0000 or later Document Version: 2008-09...
Introduction Communication Assistant (CA) is a Computer Telephony Integration (CTI) application that integrates with your Panasonic PBX, and allows you to perform many telephone operations from your PC. About the Quick Reference Guide This Quick Reference Guide is designed to serve as an overview of the features, setup and installation of Communication Assistant.
Table of Contents Table of Contents 1 Specifications ...................4 2 System Connection Diagram ..............11 3 System Requirements ................12 4 Software Installation ................13 Installing and Starting Communication Assistant ............13 Uninstalling Communication Assistant ................15 Document Version 2008-09 Quick Reference Guide for Communication Assistant...
1 Specifications Features Contact List with Presence You can easily make calls using a customizable contact list that is displayed on your PC, and search for a desired contact simply and quickly. You can also see the phone status, PC status, and the absent message of other extensions from the contact list before you make a call.
IP Camera Integration (Panasonic HX-HCM/BB-HCM/BL-C series cameras) If a Panasonic IP Camera is available on the network, you can view images or streaming video from the IP camera while talking with the other party (e.g., extension, doorphone).
• In order to use Voice Mail Assistant, the VM IP address must be set correctly. • Voice Mail Assistant uses 2 fixed ports: 20000 and 20001. • You can customize your mailbox, such as setting the notification schedule. Note This feature requires voice mail firmware version 2.1 (main software version 2.50 or later).
• A CA activation key for the desired number of users must be registered in the PBX. See the KX-NCP500/KX-NCP1000 Installation Manual for details about the activation keys. • You must enable CA mode for the extensions that will use CA in the PBX settings.
• To use Supervisor mode, you must set the appropriate extension as an ICD group supervisor in the PBX settings. • CA Pro has a 60-day trial mode, where you can use all of the features of CA Pro without installing an activation key (CA Pro trial).
On the Go To menu, select Options, and then select Dial Modification. The following window is displayed: A Minimum digits of public telephone number Specifies the minimum number of digits required to treat the dialed number as an external telephone number.
Corresponding Removed Added Dialed Number Modified Number Table No. Digits Digits +81-92-1234567 011-81-92-1234567 Configure Minimum digits of public telephone number, Remove “(0)”, and the Telephone Number Modification table as desired. Click OK. Conditions • Digital proprietary telephones (DPTs), analog proprietary telephones (APTs), IP proprietary telephones (IP-PTs), IP softphones, portable stations (PSs), and single line telephones (SLTs) can be used with CA.
2 System Connection Diagram The figure below illustrates an example network setup using CA. Remote Office A Telephone Company B Panasonic KX-NCP Series PBX C LAN D Panasonic Network Camera E Voice Processing System F PC running CA G Proprietary Telephone or Single Line Telephone...
3 System Requirements The table below summarizes the minimum and recommended requirements for running CA. Minimum Recommended 1.0 GHz Intel Pentium /Celeron pro- 2.0 GHz Intel Pentium/Celeron processor ® ® ® cessor or comparable CPU or comparable CPU 128 MB 1024 MB Microsoft Windows XP Professional...
4.1 Installing and Starting Communication Assistant 4 Software Installation 4.1 Installing and Starting Communication Assistant Note When you start CA, make sure you are logged in to an account that has administrator privileges. Double-click “Setup.exe”, and follow the on-screen guidance to install CA. When you start CA for the first time, the screen below is displayed.
4.1 Installing and Starting Communication Assistant Enter the IP address of the PBX you are connecting to, your extension number, and password. If this is the first time you are logging in for the extension, leave the password blank. If you are allowed to log in with a blank password, a dialog box is displayed prompting you to create a password.
After you have entered a new password, the CA main screen is displayed. 4.2 Uninstalling Communication Assistant To uninstall CA, perform one of the following procedures. On the Start menu, point to All Programs ® Panasonic ® Communication Assistant, and select • Uninstall.