Panasonic KX-NCP500 Programming Manual page 606

5.3 [3-1-3] Caller ID Modification
Feature Guide References
1.18.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
5.3 [3-1-3] Caller ID Modification
Programming Manual References
5.1 [3-1-1] Trunk Group—TRG Settings—
8.1 [6-1] System Speed Dial
Feature Guide References
1.18.1 Caller ID
Length of Digits
The PBX adds a certain number of digits to the caller's number depending on the length of digits, as
programmed in the Length of Digits Modification Tables assigned to the trunk group. This modification is applied
to incoming trunk calls routed through public networks when the type of network numbering plan is Unknown
or not specified.
A maximum of 4 Length of Digits Modification Tables can be programmed. Select the desired table from the
Modification Table list.
If the length of digits of an incoming trunk call is less than the
caller's number is not modified.
Minimum Caller ID Digits (for International)
Specifies the minimum number of digits required in the caller's number for it to be recognised as an international
call. The value specified here must be larger than
Value Range
1–31
Maintenance Console Location
5.3 [3-1-3] Caller ID Modification
Programming Manual References
3.35 [1-1] Slot—Port Property - PRI Port—
3.35 [1-1] Slot—Port Property - PRI Port—
606 PC Programming Manual
Caller ID Modification Table
Minimum Caller ID Digits (for National), the
Minimum Caller ID Digits (for National).
Calling Party number—Type of Number—Public, Private
Called Party number—Type of Number—Public, Private