Panasonic KX-NCP500 Programming Manual page 684

6.1 [4-1-1] Wired Extension—Extension Settings
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
3.25 [1-1] Slot—Port Property - Extension Port—Connection Command
Feature Guide References
None
Extension Name
Specifies the name of the extension.
Value Range
Max. 20 characters
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
None
Wireless XDP
Specifies the extension number of the PS with which Wireless XDP Parallel Mode is established. To enable
Wireless XDP Parallel Mode, the PS must be turned off once and then turned on after assigning this setting.
When changing the port type of an extension port in
Property - Extension Port screen, the
Value Range
Max. 5 digits (consisting of 0–9)
Maintenance Console Location
6.1 [4-1-1] Wired Extension—Extension Settings
Programming Manual References
None
Feature Guide References
1.25.5 Wireless XDP Parallel Mode
684 PC Programming Manual
DPT Type—Type on the 3.24 [1-1] Slot—Port
Wireless XDP setting must be deleted first.