Panasonic KX-NCP500 Programming Manual page 318

3.35 [1-1] Slot—Port Property - PRI Port
Feature Guide References
1.21.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
Networking Data Transfer
Enables transmission of extension status data to connected PBXs in a network. This setting is only available
when Port Type on this screen has been set to QSIG-Slave or QSIG-Master.
Value Range
No, Yes
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
Section 11 [9] Private Network
Feature Guide References
1.30.5.1 Network Direct Station Selection (NDSS)
Loopback Test started by Network
Enables a loopback test started from the network side, to be performed on the PRI23 card.
Note
The version of the PRI23 card must be 2.000 or later.
Value Range
Disable, Enable
Maintenance Console Location
3.35 [1-1] Slot—Port Property - PRI Port
Programming Manual References
Network Loopback Test
Feature Guide References
None
Extension Setting
Extension Setting parameters are applicable only for the PRI extension port.
318 PC Programming Manual