Panasonic KX-NCP500 Programming Manual page 406

3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
Connection
Indicates the channel status (reference only).
This column offers two ways to open the screen to select the channel command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The channel is in service.
OUS: The channel is out of service.
Fault: The channel is not communicating with the network.
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
Programming Manual References
3.48 [1-1] Slot—Port Property - EM Port—Connection Command (KX-TDE series only)
Feature Guide References
None
Trunk Property
Selects the trunk property of the channel.
Value Range
Public: Use the DIL method to distribute incoming trunk calls.
Private: Use the TIE line service between two or more PBXs.
Maintenance Console Location
3.47 [1-1] Slot—Port Property - EM Port (KX-TDE series only)
Programming Manual References
None
406 PC Programming Manual