Panasonic KX-NCP500 Programming Manual page 181

Value Range
Disable, Enable
Maintenance Console Location
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Programming Manual References
None
Feature Guide References
None
FAX Detection Ability
Enables the use of the FAX Detection Ability feature. Since fax signals using a codec other than G.711 cannot
be received accurately at the destination, this feature automatically switches the codec to G.711 to enable
end-to-end fax signal relay over the network.
Value Range
Disable, Enable
Maintenance Console Location
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Programming Manual References
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings—Option 1—
3rd
Feature Guide References
None
DTMF
Specifies the method to transport DTMF tones.
Value Range
Inband, Outband (RFC2833), Outband (H.245)
Maintenance Console Location
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Programming Manual References
None
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
IP Codec Priority—1st, 2nd,
PC Programming Manual 181