Panasonic KX-NCP500 Programming Manual page 294

3.33 [1-1] Slot—Port Property - BRI Port
Feature Guide References
1.21.1.11 ISDN Extension
ISDN TE Power
Enables the PBX to supply power to the ISDN TE (Terminal Equipment). This setting is only available when
Port Type on this screen is set to Extension.
Value Range
Disable, Enable
Maintenance Console Location
3.33 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.11 ISDN Extension
Ring Mode (ISDN MSN Last No. 0 or 00)
Selects the ring mode when receiving an incoming call with an MSN ending with "0" or "00". This setting is only
available when Port Type on this screen is set to Extension.
Value Range
Ring All Extension for MSN: Ring all ISDN extensions that are addressed with MSN.
Ring an Extension for MSN: Ring only one of the ISDN extensions that are addressed with MSN.
Maintenance Console Location
3.33 [1-1] Slot—Port Property - BRI Port
Programming Manual References
None
Feature Guide References
1.21.1.11 ISDN Extension
ISDN Extension Progress Tone
Enables the PBX to send call progress tones to the ISDN extension. This setting is only available when Port
Type on this screen is set to Extension.
Value Range
Disable, Enable
294 PC Programming Manual