Panasonic KX-NCP500 Programming Manual page 821

CO-CO with DISA—Transfer by DTMF "#" (Activation Key Required)
Specifies whether an outside party such as a cellular phone can transfer a trunk call to an extension within the
PBX by dialling "#" + extension number.
Value Range
Disable: "#" is ignored if dialled.
Enable (as "Flash"): The current trunk call will be placed on hold, then transferred to the extension whose
number is entered.
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Guide References
None
CO-CO with DISA—Return to DISA Top Menu by DTMF "*"
Enables a trunk caller to return to the DISA top menu by pressing " " while hearing a ringback, reorder, or
busy tone. If disabled, retrying the call is possible by pressing " ".
Value Range
Disable, Enable
Maintenance Console Location
7.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Guide References
None
Option 2
DISA Cyclic Tone Detection
Selects the cyclic tone detection mode. Cyclic tone detection is used to determine the end of a call for a DISA
trunk-to-trunk conversation established through an analogue trunk.
To apply changes to this setting, follow the steps below:
1.
Change this setting.
2.
Set the status of the OPB3 card to "OUS", then "INS".
7.3 [5-3-1] Voice Message—DISA System
PC Programming Manual 821