System Wireless—Out Of Range Registration - Panasonic KX-NCP500 Programming Manual

4.18 [2-9] System Options
Feature Guide References
1.2.2.3 Outside Destinations in Incoming Call Distribution Group
1.21.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
1.30.6 Network ICD Group
System Wireless—Out of Range Registration
Selects whether the PBX can set the status of a PS to Out of Range if no signal is received from the PS for a
preset length of time. This feature must be enabled to allow PS roaming.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
4.5 [2-3] Timers & Counters—
Feature Guide References
1.30.6.1 PS Roaming by Network ICD Group
System Wireless—SDN Delayed Ringing with LCD
Selects whether call information (such as Caller ID) is shown on the display of a PDN extension PS (i.e., a PS
with one or more PDN buttons) when a call is received while delayed ringing is set.
Value Range
Disable, Enable
Maintenance Console Location
4.18 [2-9] System Options
Programming Manual References
6.13 [4-2-3] Portable Station—Flexible Button—
Feature Guide References
1.7.1 Primary Directory Number (PDN)/Secondary Directory Number (SDN) Extension
Option 5
SLT—SLT Hold Mode
Selects how to hold a line and transfer a call with an SLT. For details of each mode, see "1.13.1 Call Hold" in
the Feature Guide.
578 PC Programming Manual
System Wireless—PS Out of Range Timer
Parameter Selection (for SDN)