Utility-Cs Information - Panasonic KX-NCP500 Programming Manual

2.6.15 Utility—CS Information
Displays information stored by the PBX regarding each Cell Station (CS).
This option is only available at Installer level, and requires that the target CSIF, DHLC, DLC, or V-IPCS4 card
be set to INS status.
For DHLC/DLC cards, only the information for ports that have CSs connected to them is displayed.
The displayed items are as follows:
Item
Slot
Port
CS Name
Status
Version
Revision
CSID
Path
Group Call
To view CS information
1.
From the Utility menu, select CS Information.
2.
From the Target CSI/F Slot No. drop-down list, select the target slot.
•
To display information on a single card, select the slot number and name of that card.
•
To display information on all matching cards, select "All".
3.
From the Interval Timer drop-down list, select the number of seconds between each automatic screen
refresh.
4.
If you want to save the CS information, click Capture.
a.
Create a file for saving the data.
b.
Click Start.
c.
Click Close.
5.
Click Start to begin monitoring.
Monitoring will be performed and the screen will refresh according to the interval specified.
To refresh the screen manually at any time, click Refresh.
6.
Click Stop to end monitoring.
7.
If you started to save the CS information in step 4, click Capture, then click Stop to record the information
to the specified file.
8.
Click Close to return to the main screen.
Description
Number of the slot (for KX-TDE600, shelf and slot)
Number of the port
Name of the attached CS
Service status of the attached CS: INS, OUS, or FAULT.
If the status is FAULT, subsequent data items for that port will be left
blank.
Version number of the programme file stored in the CS
Revision number of the programme file stored in the CS
12-digit ID number of the CS
Number of the wireless extension currently using each path. In the case
of a group, several extensions may be using the same floating extension
number.
When an extension number is not registered, the display shows
"OFF". The number of paths that can be used varies for each CS model.
For more details, see the documentation for your CS.
Number of PSs registered to the attached CS that are members of a PS
Ring Group.
2.6.15 Utility—CS Information
PC Programming Manual 87