Panasonic KX-NCP500 Programming Manual page 101

Q I cannot change a feature number.
A •
It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
An extension
•
A
•
Quick Dialling (see 4.10 [2-6-2] Numbering Plan—Quick Dial)
In any of these cases, choose another number.
Q How do I change the code used to access another PBX?
A •
Perform the following steps:
1.
Open the 4.9 [2-6-1] Numbering Plan—Main screen.
2.
Select the Other PBX Extension tab.
3.
Change the value in the
4.
Click Apply.
Q I cannot change an Other PBX Extension code.
A •
It is not possible to use the same number for 2 items.
The number you are trying to store cannot be used if it is already being used by:
•
A feature number
•
An extension
•
A
•
Quick Dialling (see 4.10 [2-6-2] Numbering Plan—Quick Dial)
In any of these cases, choose another number.
Q I cannot change a feature number on the B/NA DND Call Feature screen.
A •
The number you are trying to store is already being used by another call feature.
Please choose a different number.
Q How do I prevent extension numbers being automatically assigned to a newly
installed card?
A •
Change
Extension Card in the 3.62 [1-3] Option screen from "Automatic" to "Manual".
Saving Modified Data
Q Modified settings have not been updated in the PBX.
A •
Click Apply or OK in the sub-menu screen.
Q Modified settings are not saved even when I press the Apply button.
A •
To save the system data files, choose Save from the File menu.
Q If I reset the PBX directly after modifying settings, the modified settings are not
updated in the PBX.
Dial setting (see 11.1 [9-1] TIE Table)
Dial cell of the desired feature.
Dial setting (see 11.1 [9-1] TIE Table)
New Card Installation—Automatic Extension Number Set for
2.7.1 Frequently Asked Questions (FAQ)
PC Programming Manual 101