Panasonic KX-NCP500 Programming Manual page 493

Value Range
Disable, Enable
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Guide References
2.2.3 Tenant Service
2.2.4 Time Service
2. Break—Break 1–3 Start—Hour, Minute
Specifies the start time for each break period. Times can only be set when
Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
Programming Manual References
None
Feature Guide References
2.2.3 Tenant Service
2.2.4 Time Service
2. Break—Break 1–3 End—Hour, Minute
Specifies the end time for each break period. Times can only be set when
Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
4.7 [2-4] Week Table—Time Setting
4.7 [2-4] Week Table—Time Setting
2. Break—Break 1–3 Start—
2. Break—Break 1–3 Start—
PC Programming Manual 493