7-3] Special Carrier - Panasonic KX-NCP500 Programming Manual

Hide thumbs Also See for KX-NCP500:

Table of Contents

9.3 [7-3] Special Carrier

If the PBX has access to multiple telephone companies, a Special Carrier Access Code is required each time

a trunk call is made. By programming these Special Carrier Access Codes here, Toll Restriction (TRS)/Call

Barring (Barring) can restrict or allow calls to be made by ignoring the codes and looking at the telephone

number only. If a Special Carrier Access Code is found in the dialled number, TRS/Barring will look only at the

following digits.

A maximum of 20 (with the KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200) or 100 (with the

KX-TDE600) Special Carrier Access Codes can be programmed. With the KX-TDE600, 20 codes are displayed

at a time. To show other sets of codes, click the applicable tab.

Special Carrier Access Code

Specifies a Special Carrier Access Code. Special Carrier Access Codes and Host PBX Access codes should

Max. 16 digits (consisting of 0–9, *, and #)

Maintenance Console Location

9.3 [7-3] Special Carrier

Programming Manual References

Feature Guide References

1.5.4.9 Special Carrier Access Code

1.9.1 Toll Restriction (TRS)/Call Barring (Barring)

PC Programming Manual

Show Quick Links

Table of Contents