Panasonic KX-NCP500 Programming Manual page 547

Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
7.4 [5-3-2] Voice Message—DISA Message
Feature Guide References
1.17.6 Direct Inward System Access (DISA)
Remote Operation by Other Extension
Allows the Walking COS feature to be used from a remote location (inside the PBX, or outside the PBX using
DISA).
Value Range
Allow, Deny
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
6.10 [4-2-1] Portable Station—Extension Settings—Main—
Feature Guide References
1.9.5 Walking COS
Accept Wireless XDP Parallel Mode Set by PS
Allows Wireless XDP Parallel Mode to be set by a PS.
Value Range
Allow, Deny
Maintenance Console Location
4.12 [2-7-1] Class of Service—COS Settings
Programming Manual References
6.1 [4-1-1] Wired Extension—Extension Settings—Main—
Feature Guide References
1.25.5 Wireless XDP Parallel Mode
4.12 [2-7-1] Class of Service—COS Settings
COS
COS
COS
COS
COS
PC Programming Manual 547