Panasonic KX-NCP500 Programming Manual page 246

3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Maintenance Console Location
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Programming Manual References
None
Feature Guide References
None
Status
Indicates the port status (reference only).
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Value Range
INS: The Cell Station (CS) is in service.
OUS: The CS is out of service.
Fault: The port is not communicating with the CS.
Maintenance Console Location
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Programming Manual References
3.28 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDE series only)
Feature Guide References
None
CS Name
Specifies the name of the CSIF port.
Value Range
Max. 20 characters
Maintenance Console Location
3.27 [1-1] Slot—Port Property - CSI/F Port (KX-TDE series only)
Programming Manual References
None
246 PC Programming Manual