1-1] Slot-Port Property - Pri Port-Connection Command - Panasonic KX-NCP500 Programming Manual

3.36 [1-1] Slot—Port Property - PRI Port—Connection Command
3.36 [1-1] Slot—Port Property - PRI Port—Connection
Command
Commands for the PRI ports can be programmed.
INS
Puts the port in service.
Value Range
Not applicable.
Maintenance Console Location
3.36 [1-1] Slot—Port Property - PRI Port—Connection Command
Programming Manual References
3.35 [1-1] Slot—Port Property - PRI Port
Feature Guide References
None
OUS
Takes the port out of service. This enables a temporary non-use of the port, for example, for the purpose of
repair.
Value Range
Not applicable.
Maintenance Console Location
3.36 [1-1] Slot—Port Property - PRI Port—Connection Command
Programming Manual References
3.35 [1-1] Slot—Port Property - PRI Port
Feature Guide References
None
332 PC Programming Manual