Panasonic KX-NCP500 Programming Manual page 238

3.24 [1-1] Slot—Port Property - Extension Port
Feature Guide References
None
Extension Name
Specifies the extension name of the port.
Value Range
Max. 20 characters
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
None
XDP Mode
Turns XDP mode on or off for the port. This setting is only available when Port Type on this screen is set to
S-Hybrid.
Value Range
On: XDP enabled (The main telephone and sub telephone have different extension numbers. This is called
XDP Mode.)
Off: XDP disabled (The main telephone and sub telephone both have the main telephone's extension number.
This is called Parallel Mode.)
Maintenance Console Location
3.24 [1-1] Slot—Port Property - Extension Port
Programming Manual References
None
Feature Guide References
1.11.9 Parallelled Telephone
2.1.1 Extension Port Configuration
Parallel Telephone Ringing
Specifies whether the sub telephone (SLT) rings at the same time as the main telephone (DPT) for an incoming
call. This setting is only available when Port Type on this screen is set to S-Hybrid.
238 PC Programming Manual