Panasonic KX-NCP500 Programming Manual page 137

3.4 [1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR (for
DSP CODEC G.711 only (IP-GW)
Specifies whether or not to only use the G.711 codec for IP trunk calls.
Value Range
Enable, Disable
Maintenance Console Location
3.4 [1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR
(for KX-TDE600)
Programming Manual References
3.11 [1-1] Slot—Shelf Property - Virtual IP Gateway—GW Settings
Feature Guide References
None
DSP CODEC Priority-1 value only (others)
Specifies whether or not to only use the priority 1 codec set for the following types of calls:
•
IP extension calls
•
SIP trunk calls
Value Range
Enable, Disable
Maintenance Console Location
3.4 [1-1] Slot—Card Property - IPCMPR (for KX-NCP500/KX-NCP1000/KX-TDE100/KX-TDE200)/IPCEMPR
(for KX-TDE600)
Programming Manual References
3.15 [1-1] Slot—Port Property - Virtual IP Extension
3.21 [1-1] Slot—Port Property - Virtual IPCS
Feature Guide References
None
Port Number
Maintenance Port Number
Specifies the port number used to operate Maintenance Console via the LAN.
Value Range
1–65535
KX-TDE600)
PC Programming Manual 137