Table of Contents
Advertisement
CP3002-RC/CP3002-RA
4.3.8
Status Register 2 (STAT2)
The Status Register 2 holds status information related to the rear I/O configuration.
Table 4-13: Status Register 2 (STAT2)
REGISTER NAME
ADDRESS
BIT
NAME
7 - 6
Res.
Reserved
5 - 4
RCFG
Rear I/O configuration:
00 = Reserved
01 = COMA, COMB, GPIO
10 = Reserved
11 = Reserved
3 - 0
Res.
Reserved
4.3.9
Board ID High Byte Register (BIDH)
Each Kontron board is provided with a unique 16-bit board-type identifier in the form of a
hexadecimal number. The Board ID High Byte Register is located in the address 0x288. The
Board ID Low Byte Register is located in the address 0x28D.
Table 4-14: Board ID High Byte Register (BIDH)
REGISTER NAME
ADDRESS
BIT
NAME
7 - 0
BIDH
Board identification:
CP3002-RC/CP3002-RA:
4.3.10
Board and PLD Revision Register (BREV)
The Board and PLD Revision Register signals to the software when differences in the board
and the Programmable Logic Device (PLD) require different handling by the software. It starts
with the value 0x00 and will be incremented with each change in hardware as development
continues.
Table 4-15: Board and PLD Revision Register (BREV)
REGISTER NAME
ADDRESS
BIT
NAME
7 - 4
BREV
Board revision
3 - 0
PREV
PLD revision
ID 1039-3625, Rev. 1.0
STATUS REGISTER 2 (STAT2)
0x287
DESCRIPTION
BOARD ID HIGH BYTE REGISTER (BIDH)
0x288
DESCRIPTION
0xB330
BOARD AND PLD REVISION REGISTER (BREV)
0x289
DESCRIPTION
Configuration
RESET
ACCESS
VALUE
00
R
01
R
0000
R
RESET
ACCESS
VALUE
0xB3
R
RESET
ACCESS
VALUE
N/A
R
N/A
R
Page 4 - 11
Advertisement
Table of Contents
