Operational Limits For The Cp3002-Ra; Peripherals; Cp3002-Ra With I7-620Le, 2.0 Ghz - Kontron CP3002-RC User Manual

CP3002-RC/CP3002-RA
6.5.1

Operational Limits for the CP3002-RA

Figure 6-2:

CP3002-RA with i7-620LE, 2.0 GHz

Volumetric Flow Rate (CFM)
Volumetric Flow Rate (m /h)
6.5.2

Peripherals

When determining the thermal requirements for a given application, peripherals to be used with
the CP3002-RC/CP3002-RA must also be considered. Devices such as SATA Flash modules
which are directly attached to the CP3002-RC/CP3002-RA must also be capable of being op-
erated at the temperatures foreseen for the application. It may very well be necessary to revise
system requirements to comply with operational environment conditions. In most cases, this
will lead to a reduction in the maximum allowable ambient operating temperature or even re-
quire active cooling of the operating environment.
Warning!
As Kontron assumes no responsibility for any damage to the CP3002-RC/
CP3002-RA or other equipment resulting from overheating of the CPU, it is
highly recommended that system integrators as well as end users confirm that
the operational environment of the CP3002-RC/CP3002-RA complies with the
thermal considerations set forth in this document.
ID 1039-3625, Rev. 1.0
3
Airflow (m/s)
Thermal Considerations
Typical Processor and Graphics
Controller Workload
Maximum Processor and Graphics
Controller Workload
recommended
operating range
Page 6 - 9