Table of Contents
Advertisement
Functional Description
2.10.10.1 CompactPCI Connectors J1 and J2
The complete CompactPCI connector configuration com-
prises two connectors named J1 and J2.
Their function is as follows:
• J1: 32-bit CompactPCI interface with PCI bus
signals, arbitration, clock and power
• J2: arbitration, clock and rear I/O interface
functionality
The
CP3002-RC/CP3002-RA
CompactPCI bus architecture. The CompactPCI standard
is electrically identical to the PCI local bus. However, these
systems are enhanced to operate in rugged industrial
environments and to support multiple slots.
2.10.10.2 CompactPCI Connector Keying
CompactPCI backplane connectors support guide lugs to
ensure a correct polarized mating (3.3 V or 5 V V(I/O)
coding).
The CP3002-RC/CP3002-RA supports universal (3.3 V
and 5 V) PCI V(I/O) signaling voltages with one common
termination resistor configuration. Therefore, the CP3002-
RC/CP3002-RA can be inserted in both, 3.3 V and 5 V
CompactPCI systems and provides itself no guide lug.
Page 2 - 12
is
designed
for
CP3002-RC/CP3002-RA
Figure 2-1: CPCI Connectors
J1/J2
22
a
J2
25
J1
Note:
Pinrow F: GND
Pinrow Z: NC
ID 1039-3625, Rev. 1.0
1
1
ED C B A
F
Z
Advertisement
Table of Contents
