Debug Led Control Register (Dlctrl); Debug Led Control Register (Lctrl) - Kontron CP3002-RC User Manual

CP3002-RC/CP3002-RA
4.3.15

Debug LED Control Register (DLCTRL)

This register is used to switch on and off the Debug LEDs.
Table 4-20: Debug LED Control Register (LCTRL)
REGISTER NAME
ADDRESS
BIT NAME
7-4 DLCMD Debug LED command:
0000 = Get DLED 0
0001 = Get DLED 1
0010 = Get DLED 2
0011 = Get DLED 3
0100 - 0111 = Reserved
1000 = Set DLED 0
1001 = Set DLED 1
1010 = Set DLED 2
1011 = Set DLED 3
1100 - 1111 = Reserved
3-0 DLCOL Debug LED color:
0000 = Off
0001 = Green
0010 = Red
0011 = Red+green
0100 - 1111 = Reserved
Note ...
This register can only be used if the Debug LEDs indicated in the "Debug LED
Configuration Register" (Table 4-18) are configured in Mode A.
ID 1039-3625, Rev. 1.0
DEBUG LED CONTROL REGISTER (DLCTRL)
0x291
DESCRIPTION
Configuration
RESET
ACCESS
VALUE
0000 R/W
0000 R/W
Page 4 - 17