Table of Contents
Advertisement
Thermal Considerations
Figure 6-1:
Position of the Reference Points on the CP3002-RC
The following table provides the maximum reference point temperatures for the CPU indicated
at typical processor and graphics controller workload and at maximum processor and graphics
controller workload. Operation at temperatures above those specified for the table below can
result in reduced system performance.
Table 6-1: Maximum Reference Point Temperature at 105°C CPU Die Temperature
MAXIMUM PROCESSOR AND GRAPHICS
CPU VERSION
Intel® Core™ i7-620LE
2.0 GHz
Note ...
The temperature values indicated in the tables above can vary depending on
the location of the measurement point or the system performance.
Warning!
As Kontron assumes no responsibility for any damage to the CP3002-RC or
other equipment resulting from overheating of the CPU, it is highly recom-
mended that system integrators as well as end users confirm that the opera-
tional
considerations set forth in this document.
Page 6 - 6
x
Reference Point 1
MAXIMUM REFERENCE POINT TEMPERATURE
AT 105°C CPU DIE TEMPERATURE
CONTROLLER WORKLOAD
Point 1
80 °C
environment
of
the
CP3002-RC/CP3002-RA
Reference Point 2
TYPICAL PROCESSOR AND GRAPHICS
CONTROLLER WORKLOAD
Point 2
Point 1
80 °C
85 °C
CP3002-RC
complies
Point 2
85 °C
with
the
thermal
ID 1039-3625, Rev. 1.0
Advertisement
Table of Contents
